Having mold problems? Get connected with a mold expert in your area

How To Remove Mold Behind Baseboards and Floor Trim

How To Remove Mold Behind Baseboards and Floor Trim

Could mold be growing under the baseboards and behind the floor trim in your home?

Mold can grow in various places, and all it takes is moisture, a food source, and the right conditions for it to develop.

As a result, mold growth in bathrooms behind baseboards is quite common.

Dangers of Mold

Mold is a common indoor problem that can have health effects and cause property damage. Many different species of mold exists, and some have been linked with allergic reactions.

Here are some of the potential health effects linked to mold exposure:

  • Hay fever-like symptoms
  • Allergies
  • Fatigue
  • Coughing

If you suspect a mold problem or observe mold  growing in your home or business, it is essential that you start getting rid of it as soon as possible.

The Various Colors of Mold

Mold colonies growing on guitar case

While mold comes in various colors, black mold growth is the most frequent type of mold you’ll encounter in your house. Here are some additional common shades of mold, orange, green, white, and red.

What Causes of Mold behind Baseboards

Mold cannot survive in locations that do not have a moisture source, such as behind baseboards.

As a result, to prevent mold from growing in your house, you need to address the moisture sources as soon as possible. Not only that, but if you leave the water damage untreated, it might cause additional problems, including dry rot.

Water damage is an emergency that may be caused by various factors, including poor installation, clogged drains, broken pipes, and leakage.

How to Check for Moisture

A moisture meter can identify damp or wet areas that can cause a problem. This might not always be apparent because it could indicate a structural problem where water has accumulated over time.

To ensure you get this aspect correct, you should call remediation expert.

Suppose your home or business has previously been impacted by water damage.

In that case, you should also consider utilizing a moisture meter to ensure that all of the water has been dried correctly, assuring that no mold may develop.

You can also hire a plumber or leak detection firm to check for any leaks.

What to Do If You Have Mold on Under Baseboards and/or Behind Floor Trim

If you can see mold on your property, it’s a good idea to assume that you have an problem that needs to be addressed. In some cases, you will need to contact an expert for help with mold remediation.

You’ll have a more challenging time detecting problems if you wait longer.

Even if there is no visible mold in your home, it is possible that mold exists and is hidden. With that being said, if you believe you have mold in your house but aren’t sure, get it inspected by a professional.

How To Get Rid Of Mold From Behind or Under Baseboards

Mold remediation contractors use a variety of methods to remove mold growth. Here are some of the best techniques:

1. Find the Moisture Source

There may also be a source of dampness that is encouraging mold to develop and grow. As soon as possible, you should locate and fix the source of the moisture problem.

2. Remove or clean areas with visible mold growth.

If the mold growth has only just begun to develop, you can remove it with a solutions like Mold Armor if necessary.

Although it may appear logical to use a home cleaner such as bleach to clean the mold growth, this is not recommended since these cleaners might cause more problems. 

In some cases, simple detergent and water is sufficient to clean small mold growth from your baseboards.

3. Demolishing Any Non-Salvageable Areas

If the mold is too severe, you may need to demolish the infected parts and replace them. This technique of eliminating mold is effective, but it is sometimes more expensive.

As a result, it’s preferable to prevent mold growth before it develops into a serious problem requiring removal and replacement.

4. Filter the Air

If mold has been growing in your home for a lengthy period, it is almost certainly polluting the air.

In this situation, the contractor may use a negative air machine with HEPA filtration during the cleanup procedure to remove pollutants from the air.

In addition to reducing airborne mold spore concentrations, using an air purifier will also remove other airborne contaminants such as dust and allergens from the air.

5. Dry Wet Areas

The mold may grow back if the damaged region is not dried correctly.

Fans, dehumidifiers, and increased temperatures can all be used to expedite the drying process.

In any case, water damage and mold remediation are complex tasks. If the process is not done correctly can cause the mold to regrow.

6. Check for Mold in Other Areas

If your baseboards were covered in mold growth, there’s a good chance that mold will spread to other areas in your home or building because spores can migrate from one area to the next easily.

If these mold spores migrate to other areas of the home that is dark, moist, and humid, they have a high probability of germinating. 

Given that colonies are already present in the area, additional mold colonies will likely produce spores and lead to the development of another colony in another area.

Monitor the Affected Area over Time

Whether you hire a mold remediation professional or do it yourself, monitoring the areas where mold was removed is critical to ensuring that it does not return.

If there is any regrowth, It’s a sign that the mold or moisture problem was not adequately addressed the first time. If you completed the mold removal process on your own last time, we recommend hiring a professional

How To Prevent Mold Growing On, Under or Behind Baseboard

To avoid becoming a victim of mold in the future, it is essential to do all you can to prevent water damage in your home or commercial building.

Water damage and mold growth are most common in moisture-prone areas like beneath baseboards in bathrooms. So, it is crucial to inspect these areas frequently and fix any leaks as soon as they happen.

More Mold related content